Cleaning chemicals
Environmentally friendly for clean parts
Our product range
From aqueous cleaners, defoamers, and aqueous cleaners to solvents and stabilisers, our cleaning chemical solutions offer you sustainable cleaning agents that guarantee maximum efficiency and safety. Learn more about our chemeco brand and our customised process development.
chemeco - A relevant brand
chemeco is our chemicals brand that represents perfect interlinking between chemicals and sustainability. We at chemeco place the highest value on the production and development of cleaning chemicals that offer outstanding cleaning performance and at the same time pose a low risk to people and the environment. All chemeco products are manufactured in Germany at our Neubulach site, where quality and sustainability are our highest priorities.
Process development for your task
Our laboratory analyses enable us to determine the best cleaning agent for each specific project. We run three standardised test series:
- Solubility: We analyse how the lubricants dissolve in different media, which gives us initial insights into phase separation, the required mechanical influence, foam formation and much more.
- Cleaning performance: Every lubricant is applied to parts or test carriers provided by the customer. We will then perform sample cleaning in a beaker. We will determine the necessity of ultrasound, cleaner concentrations and the optimum cleaning times and temperatures. We will determine surface cleanliness by means of fluorescence or contact angle.
- Preparation: We will test the appropriate treatment process for your project and check, amongst other things, whether polymerisation or acids are produced during distillation in the laboratory.
Product responsibility and product safety
We take product responsibility seriously. When designing our products, we scrutinise possible raw materials just as critically in terms of environmental compatibility and occupational safety as we do for their effectiveness and material compatibility. Long service life and recyclability are further important criteria for our product development.
Product safety requires consistent quality control. Careful laboratory tests accompany many production steps and ensure process monitoring. We will of course remain your point of contact even after introduction of our cleaning processes. Qualified sample analyses are just one example of our service.
NEWS
It’s all about pipe cleanliness at the Tube exhibition in Düsseldorf
We are at the Tube trade fair in Düsseldorf, presenting our pipe cleaning solutions. Put your trust in us, just like our customer BEWO CS.
€5,000 donation for the Neubulach Youth Centre
Yesterday, we presented the youth centre team with a cheque for €5,000 to be used for future projects.
Acquisition of Sporer PCS GmbH
On 1 January 2026, we acquired Sporer Parts Cleaning Solutions GmbH from Mühlental (Saxony).
Looking back on an eventful year in 2025
The year is drawing to a close – time to pause and say thank you.
SLC and container cleaning made easy – with the new vapic Clean Box
With our new vapic Clean Box chamber cleaning system, we offer an attractive alternative for cleaning SLCs and other containers.
Successful generational change
Today is the day: our company founder Reiner Wolf is handing over management of the company to his son Samuel Wolf on 1 December 2025, who will continue to run the company together with Jonas Keppler.
Invitation to our in-house exhibition
We look forward to welcoming you to this year's in-house exhibition on Thursday, 13 November from 14:30.
Review of parts2clean 2025 – Innovation, exchange and anniversary celebrations at vapic
Three successful days at parts2clean 2025 in Stuttgart are now behind us – and they were a complete success in every respect!
Strong together in the wvib
We have been a member of the wvib since 1 October 2025. We look forward to working with you.
Visit us at the parts2clean
From 7 to 9 October 2025, we will be represented twice at parts2clean in Stuttgart.
Dates
HeatTreatmentCongress
13 – 15 October 2026 | Cologne trade fair
Whether before or after heat treatment, cleaning is always an important step in the process chain. Visit our exhibition stand to find out more about our diverse and customised solutions for industrial component cleaning.
Make-to-Order Days
09 – 10 June 2026 | Stuttgart Exhibition Area | Hall 9, Stand 9E08
The Make-to-Order Days in Stuttgart are the new marketplace for the development and procurement of precision parts. Visit our stand to find out about the possibilities for removing contamination from components in a reliable and process-safe manner.
AMB
15 – 19 September 2026 | Messe Stuttgart
We will be represented with our own stand at AMB, the meeting place for the international metalworking industry. We look forward to seeing you at our stand and discussing your cleaning tasks.
Webinar: Basics of parts cleaning
24. July, 2:00 - 2:30 pm | Live via Teams
We look forward to receiving your registration for our webinar on the basics of parts cleaning.
You can expect:
- Introduction to the basics of parts cleaning: Why and how do we clean?
- Overview of common procedures: Mechanical, aqueous, solvent-based
- Decision-making aids: Which method suits which requirements?
- Practical tips for beginners and optimising existing processes
Click on register now for more information and registration.
In German language only.
Treffpunkt Werkzeugbau (Meeting point toolmaking)
3. December 2025 | Finnentrop
We will be sponsoring the VDWF event "Treffpunkt Werkzeugbau" feat. Dominik Klein in Finnentrop on 3 December and will be available at our info stand.
In-house exhibition on November 13 and 14
November 13-14 2025 | Harry à Wengen Straße 6, 75387 Neubulach-Oberhaugstett
We cordially invite you to our in-house exhibition from Thursday, November 13 at 2:30 pm to Friday, November 14 at 1:00 pm.
Mach-Tech
13. to 16. Mai 2025 | Budapest
At Mach-Tech in Hungary you will find us in Hall A at Stand 304D.
Blechexpo
21-24 October 2025 | Stuttgart
We will be represented at the VDWF joint stand 4430 in hall 4 at Blechexpo in Stuttgart.
Webinar: Decision-making aid: solvent or aqueous cleaning?
7. May 2025, 10:00 - 11:00 am | Live via Teams
We look forward to receiving your registration for our webinar Decision-making aid: solvent or aqueous cleaning?
You can expect:
- A practical comparison of solvent-based and aqueous cleaning systems
- Decisive criteria for choosing the right cleaning method
- Tips on how you can optimise cleanliness, costs and environmental compatibility
- Inspiring examples from practice
Click on ‘Register now’ for further information and registration.
In German language only.
parts2clean 2025
7–9 October 2025 | Stuttgart
We will once again be exhibiting at the industry's leading trade fair in 2025. You will find us in Hall 10 at Stand C35 and at the CEC joint stand, Stand B36. We are happy to offer you a free visitor ticket – simply send us an email to request one!
Your personal contact
Florian Pasch looks forward to providing you with comprehensive advice on selecting the optimum cleaning chemicals. Please feel free to contact him.
Florian Pasch
Phone: +49 7053 96813-217
Email: verkauf@vapic.de